Build a sketch drawing toy using CircuitPython and 3D Printing! Use the Feather M4 and 2.4in TFT FeatherWing to make a portable sketch drawing hand held device. Use knobs to move the cursor and flip the toggle switch to pen up or down and use the button to clear the display. This uses Display IO in CircuitPython to draw pixels on the TFT display.Learn Guidehttps://learn.adafruit.com/sketch-drawing-toy/Code on Githubhttps://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/CircuitPython_Knob_Sketcher/feather_sketcher/code.py2.4in TFT FeatherWinghttps://www.adafruit.com/product/3315Feather M4https://www.adafruit.com/product/385716mm momentary push buttonhttps://www.adafruit.com/product/1503 Mini Toggle switchhttps://www.adafruit.com/product/3221 2x 10k Potentiometers Linearhttps://www.adafruit.com/product/562 1200mAh batteryhttps://www.adafruit.com/product/258 Visit the Adafruit shop online - http://www.adafruit.com-----------------------------------------LIVE CHAT IS HERE! http://adafru.it/discordAdafruit on Instagram: https://www.instagram.com/adafruitSubscribe to Adafruit on YouTube: http://adafru.it/subscribeNew tutorials on the Adafruit Learning System: http://learn.adafruit.com/-----------------------------------------