Build a 3D printed Menorah that lights up with NeoPixel LEDs and CircuitPython. A push button allows you to light up a NeoPixel LED on each night of Hanukkah.Learn Guide: https://learn.adafruit.com/neopixel-menorah/This minimalistic design features parts that snap fit together and print without any supports. The assembly is modular and easy to put together.The bulbs are 3d printed in translucent PLA and the NeoPixels are fitted inside the candle holders.Code on GitHubhttps://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/NeoPixel_Menorah/code.pyPartsQT Py RP2040https://www.adafruit.com/product/4900NeoPixel Button PCBhttps://www.adafruit.com/product/435616mm Push Buttonhttps://www.adafruit.com/product/15033-pin Cableshttps://www.adafruit.com/product/47212-pin Cableshttps://www.adafruit.com/product/4720M2.5 Hardware Kithttps://www.adafruit.com/product/3299USB-C Cablehttps://www.adafruit.com/product/4696Visit the Adafruit shop online - http://www.adafruit.com-----------------------------------------LIVE CHAT IS HERE! http://adafru.it/discordAdafruit on Instagram: https://www.instagram.com/adafruitSubscribe to Adafruit on YouTube: http://adafru.it/subscribeNew tutorials on the Adafruit Learning System: http://learn.adafruit.com/-----------------------------------------