Build 3D printed props inspired by the talking computer and the total conversion weapon from Star Trek, the animated series using Adafruit Feather M4 and Circuit Python!Learn Guidehttps://learn.adafruit.com/talking-computer-from-star-trek/Code on GitHubhttps://github.com/adafruit/Adafruit_Learning_System_Guides/tree/main/Trek_Kzinti_Prop Feather M4https://www.adafruit.com/product/3857PAM8302 Amphttps://www.adafruit.com/product/2130Min Over Speakerhttps://www.adafruit.com/product/3923Slide Switchhttps://www.adafruit.com/product/80516mm Momentary Push Buttonhttps://www.adafruit.com/product/15042200mAh Batteryhttps://www.adafruit.com/product/178110mm Yellow LEDhttps://www.adafruit.com/product/326045mm Slide Potentiometerhttps://www.adafruit.com/product/42729x Kailh Box Key Switcheshttps://www.adafruit.com/product/49559x Orange Key Capshttps://www.adafruit.com/product/5175 Visit the Adafruit shop online - http://www.adafruit.com-----------------------------------------LIVE CHAT IS HERE! http://adafru.it/discordAdafruit on Instagram: https://www.instagram.com/adafruitSubscribe to Adafruit on YouTube: http://adafru.it/subscribeNew tutorials on the Adafruit Learning System: http://learn.adafruit.com/-----------------------------------------